How to Change The Oil Filter.
Close
Login to Your Account
CBR250 Forums - Powered by vBulletin
Page 1 of 5 123 ... LastLast
Results 1 to 10 of 44

Thread: How to Change The Oil Filter.

  1. #1
    Biker
    Member #
    311
    Join Date
    May 2010
    Location
    Down Under
    Posts
    158

    How to Change The Oil Filter.

    So you've removed the oil filter assembly from the engines sump like this:



    Remove old filter and retain the metal washer on the bottom side of the filter.



    Remove old seal from oil filter cap.



    Remove old seal from oil filter drain bolt.



    Install new seal on the oil filter cap, (lube the seal with a small amount of new oil).



    Install new seal on the oil filter drain bolt, (lube the seal with a small amount of new oil).



    Install the old washer in-between the oil filter and spring,



    Soke the new oil filter in fresh oil then, Install the new oil filter (Writing on the filter faces up).




    Done! Ready to install back into the sump!

  2. #2
    Super Moderator
    Member #
    4
    Join Date
    Mar 2002
    Location
    India
    Posts
    27,307

    RE: How to Change The Oil Filter.

    Great thread CBRpower !!!

    Many people prefer to soak the oil filter in fresh oil before they install it.... me being one of them cause I dont want my engine to starve off oil for even a minute.

    Only the best for my baby :-)

  3. #3
    Biker
    Member #
    311
    Join Date
    May 2010
    Location
    Down Under
    Posts
    158

    RE: How to Change The Oil Filter.

    Quote Originally Posted by K916
    Great thread CBRpower !!!

    Many people prefer to soak the oil filter in fresh oil before they install it.... me being one of them cause I dont want my engine to starve off oil for even a minute.

    Only the best for my baby :-)
    That's a very good idea, ill do that next time thanks matey!

  4. Remove Advertisements
    CBR250.com
    Advertisements
     

  5. #4
    Biker paparoach's Avatar
    Member #
    43
    Join Date
    May 2010
    Location
    Laguna, Philippines
    Posts
    218

    RE: How to Change The Oil Filter.

    do you guys have the part number for the rubber seals?

  6. #5
    Biker
    Member #
    311
    Join Date
    May 2010
    Location
    Down Under
    Posts
    158

    RE: How to Change The Oil Filter.

    when i went to Honda and asked for a oil filter for the mc22, it came with the oil filter, and the 2 oil seals in one sealed bag.

  7. #6
    Biker paparoach's Avatar
    Member #
    43
    Join Date
    May 2010
    Location
    Laguna, Philippines
    Posts
    218

    RE: How to Change The Oil Filter.

    kewl! hmmm, hope the same applies here in the Philippine market...

  8. #7
    Super Moderator
    Member #
    4
    Join Date
    Mar 2002
    Location
    India
    Posts
    27,307

    RE: How to Change The Oil Filter.

    Quote Originally Posted by paparoach
    kewl! hmmm, hope the same applies here in the Philippine market...
    Parre, kumusta ang buhay?

    Quote the part number that is visible in CBRPower's first thread above... it'll have everything you need

  9. #8
    Junior Biker NSCB's Avatar
    Member #
    134
    Join Date
    Nov 2009
    Location
    Philippines
    Posts
    38

    RE: How to Change The Oil Filter.

    Quote Originally Posted by paparoach
    kewl! hmmm, hope the same applies here in the Philippine market...
    i've already asked around....the filter is available in most Auto Supply shops...with regards to the rubber seals, i guess we need to buy them separately from stores that sells gaskets & o-rings...[hr]
    Quote Originally Posted by K916
    Quote Originally Posted by paparoach
    kewl! hmmm, hope the same applies here in the Philippine market...
    Parre, kumusta ang buhay?

    Quote the part number that is visible in CBRPower's first thread above... it'll have everything you need
    @K916
    are you from the Philippines too?

  10. #9
    Senior Biker
    Member #
    228
    Join Date
    Sep 2009
    Location
    Sydneys Hills
    Posts
    4,388

    RE: How to Change The Oil Filter.

    What happens if your missing the washer?

  11. #10
    Biker
    Member #
    231
    Join Date
    Aug 2009
    Location
    Sydney
    Posts
    728

    RE: How to Change The Oil Filter.

    When i bought my filter the guy recommended i change the washer as well, so your local honda dealer should have them.

    Failing that, i guess you could any old washer with the same diametre and thickness.

Page 1 of 5 123 ... LastLast

Similar Threads

  1. OEM oil filter versus cheapo oil filter
    By juxt in forum General Off-Topic
    Replies: 18
    Last Post: 15th November 2013, 03:14 PM
  2. Change my air filter?
    By winter in forum General Technical
    Replies: 17
    Last Post: 15th May 2012, 01:48 AM
  3. Problem with oil filter change!
    By H-on-daWay in forum CBR250 Forum
    Replies: 12
    Last Post: 2nd April 2012, 01:14 AM
  4. where to buy oil filter?
    By rubenastley in forum CBR250 Forum
    Replies: 6
    Last Post: 27th March 2011, 06:02 AM
  5. To filter or not to filter, that is the question.
    By juxt in forum General Off-Topic
    Replies: 40
    Last Post: 11th January 2011, 06:25 PM

Search tags for this page

cbr 250 2011 oil change

,

cbr 250r oil change parts

,

cbr250r oil filter

,
does cbr250r oil filter need oring
,

honda cbr250 oil filter

,

honda mc14e oil filter location

,
hondacbr250oilchange
,
how often change oil cbr250r
Click on a term to search our site for related topics.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •