Project PB-193P
Close
Login to Your Account
CBR250 Forums - Powered by vBulletin
Results 1 to 8 of 8
Like Tree1Likes
  • 1 Post By CammyGTIR

Thread: Project PB-193P

  1. #1
    Biker CammyGTIR's Avatar
    Member #
    92
    Join Date
    Feb 2008
    Location
    The Shire, NSW
    Posts
    1,971

    Project PB-193P

    Hello all, it's been a very long time since I've been around on these forums! I see there is still a little bit of life left, as well as a few of the old guard.

    This thread will be to chronicle my next project build, code-named for the colour scheme I've chosen to use.

    If you'd like to see the scheme/unsure of the code, you can view it in the below thread:

    Cibby OEM colour schemes

    I've chosen this colour scheme for a few reasons;

    1. I've already had an extremely clean Tri-Colour MC22.
    2. The PB-193P scheme to me, is stereotypically 90's era JDM, which I love.
    3. The PB-193P scheme is also very rare to see. In my life, I've only ever seen one other with it.
    4. This scheme has a twin, which is interesting. The NH-193P with red wheels is far more common. I see plenty of these.

    My intention is to do a OEM build, as far as possible. I want the bike to appear completely stock. This means that while I will be powdercoating some parts, they will be in the same colour as it left the factory. This style of build means I'm certainly going to acquaint myself intimately with cleaning products, high-pressure washers and degreasers!

    Ultimately, I want it to look as good as the bike in the below thread. (in the NH-193P scheme)

    http://www.bayarearidersforum.com/forums...p?t=397964

    Showroom condition, as new.

    TO DO LIST

    1. Find the red, blue and white colour codes used, as getting my hands on an OEM tank in great cond. will be very difficult.
    2. Purchase OEM parts unlikely to be found on the donor bike.
    3. Purchase replacement OEM parts such as the engine and clutch cases (almost certainly rashed)
    4. Research the best way to clean the engine case/block/other components/what to use to restore to near new condition.
    5. Purchase donor bike
    6. Much more, I'm sure.

    That'll do for now, any questions or assistance, let me know.
    Slipry likes this.
    Also, Penis

    Sig King 2010

  2. #2
    Biker
    Member #
    14423
    Join Date
    Aug 2014
    Location
    San Antonio, TX, USA
    Posts
    365
    you might try searching colorite. I'm not sure if the 900rr had a pb193 scheme, but it did have nh196h. colorite does have the nh196h colors. Good luck!

  3. #3
    nOOb
    Member #
    19785
    Join Date
    Aug 2016
    Posts
    1
    That linked bike looks stunning - I'd be interested to watch a donor bike slowly make it's way there...

  4. Remove Advertisements
    CBR250.com
    Advertisements
     

  5. #4
    Senior Biker Lane's Avatar
    Member #
    374
    Join Date
    Aug 2008
    Location
    The garage!
    Posts
    4,628
    If I had a pristine MC22 still sitting in the garage it would be this colour scheme, will watch with interest.

  6. #5
    Biker CammyGTIR's Avatar
    Member #
    92
    Join Date
    Feb 2008
    Location
    The Shire, NSW
    Posts
    1,971
    First update.

    My wallet is twitching.

    Not a lot to report, except I found something that could potentially derail this thread before it even begins.

    Behold.

    CBR250RR MC22 normal real running. low running [ animation equipped]: Real Yahoo auction salling

    Just soak it in for a minute. It's everything I could want. I'm looking at this with jaded, cynical eyes, and I still think those are genuine kms.

    I looked into it. I found the only two RAWS importers in Australia who have the CBR250RR on their schedule.

    One, Otobai, who a few of the older members might still be able to scratch their heads and say to themselves "Huh, aren't they the Sumoto mob?"

    You'd be right. I fired off an email.

    A message that you sent could not be delivered to one or more of its recipients. This is a permanent error. The following address(es) failed:

    help@otobai.com.au Mailbox is full / Blocks limit exceeded / Inode limit exceeded.

    Not the best start.So I called them. "Yeah we're having some trouble with our internet. Send it to our home email. Sent. Never heard back. Alright, whatever.

    Got in contact with the other mob.

    "I did a quick calculation.
    Bike compliance would cost him about $14,000
    Then has to get to NSW and register."

    Obviously they're not particularly interested in a competitive quote. With the current exchange rate, and that CBR250RRs are going for silly money over in Japan at the moment, I can't say I'm too surprised. A resurgence of interest in Japan perhaps?

    As heartbreaking as it is, this is where my interest in that bike has to stop. $14 000 is attainable, but just not intelligent. I could do a lot to a locally purchased one with that kind of money.

    Square one. The search for the donor bike resumes.
    Also, Penis

    Sig King 2010

  7. #6
    Biker Slipry's Avatar
    Member #
    8417
    Join Date
    Jul 2012
    Location
    Adelaide SA
    Posts
    1,287
    sumoto - cant believe they are still around in one guise or another selling mc19s with rr decals and exactly 23000kms on all the ODOs
    Quote Originally Posted by schultzy View Post
    I stuck a battery up my arse.
    Yeah, that's a cool story...

  8. #7
    Biker CammyGTIR's Avatar
    Member #
    92
    Join Date
    Feb 2008
    Location
    The Shire, NSW
    Posts
    1,971
    Update.

    The donor bike has been purchased. $2400 down from an advertised $3000. Bought off a young guy in Ryde, he had been using it for University commuting
    for about a year, but had recently upgraded to a Yamaha FZS. It's in pretty rough shape, but for that price, I'll be able to take care of it, no problem.

    The priority will be on the carbs, as it was not very happy down low, so they'll need a clean at the minimum. I'll probably take them apart and replace the needles and jets in any case. It's also lacking a fuel tap, from what I can see, so that'll need replacing too. New chain, oil, coolant and most importantly, fairings less than six months old.

    I've put the feelers out for painting the tank, although I'd be happy for any suggestions. Crutch hasn't been on the forum for about a year unfortunately, so I might have to go with a non-member.

    Currently putting a list of parts together. Going on a spending spree soon. The tear down will begin in the next few weeks.

    Project PB-193P-cbr-garage.jpg Project PB-193P-cbr-garage2.jpg
    Also, Penis

    Sig King 2010

  9. #8
    Biker CammyGTIR's Avatar
    Member #
    92
    Join Date
    Feb 2008
    Location
    The Shire, NSW
    Posts
    1,971
    Project PB-193P-image.jpgProject PB-193P-image.jpgProject PB-193P-image.jpg

    Just a couple of pictures of the tools, the parts and a freshly painted exhaust
    Also, Penis

    Sig King 2010

Similar Threads

  1. Looking for R1 project
    By saffa in forum Project Bikes
    Replies: 7
    Last Post: 24th October 2012, 04:54 PM
  2. need help with my project
    By black-45 in forum CBR250 Forum
    Replies: 34
    Last Post: 7th February 2012, 08:44 PM
  3. Too quick to be a project
    By Hessian in forum Project Bikes
    Replies: 16
    Last Post: 15th July 2011, 09:39 AM
  4. 250RR project, still going
    By Speedracer10 in forum Project Bikes
    Replies: 7
    Last Post: 17th April 2011, 06:25 PM
  5. The project !!!
    By georgev in forum Project Bikes
    Replies: 9
    Last Post: 28th March 2011, 11:23 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •